EcoQuip 2 EQs2 Elite Twinline - Pneumatic Deadman, ATEX 262981

Two pots and two nozzles on one skid. Twice the production for large abrasive blasting jobs.

Call for discounted pricing

Twinline unites have two pots and include SST Crash frame, SST enclosure, water dose, bag management (step and shelf), hose rack and media strainer kit. #8 High Production Model. 50' Blast hose.

ATEX units allow for 150' of Pneumatic Deadman, does not ship with Dual Blast Control option.

EcoQuip EQ2 Twinline operates on a single compressor with two nozzles to double your production rate, which makes the BIG jobs more profitable.

You now don't have to worry about bringing two separate skid units to job. With the new Twinline, you can now have two operators working off one machine without interruption.

EcoQuip Vapor Abrasive Blast Equipment Sandblasting

EcoQuip EQs2 Twinline comes complete with:

  • 2 x 6.5 cubic feet blast pots
  • Stainless steel crash frame and enclosure
  • Water dose valve, step, media shelf, hose rack, air inlet filter/ ball valve and media strainer kit
  • 2 x 50 ft. of Graco blast hose
  • 2 x #8 Graco high performance nozzles
  • 2 x pneumatic or electric blast controls

Key Applications

  • Shipyards
  • Tank farms
  • Bridge and infrastructure
  • Road construction and repair

Vapor Abrasive Blasting: A cleaner, easier path to profitable results

  • Generates less dust - 92 percent less airborne dust than dry blasting
  • Uses less water than traditional water-based wet blasting
  • Optimizes air, water and media ratio – resulting in a fine mist with a blast that is powerful, but with less dust
  • ATEX approved units available for explosive atmospheres

EcoQuip 2 EQs2 Elite

Maximum Fluid Working Pressure
175 psi
Operating Temperature
35˚ - 110˚ F
Recommended Compressor Size
 375-1600 CFM
Blast Hose Size
1.25 in. ID
Abrasive Capacity*
1760 lb.
Dry Weight
1560 lb.
Wet Weight*
3650 lb.
Pressure Pot Volume
6.5 cubic feet
Water Tank Volume
Air Inlet Connection†
1–1/2 npt
* Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense media will decrease weight.
† 2 in. ground boss adapter included in tool box (see Parts section of the EcoQuip 2 manual for more detail).

Air Supply Hose Minimum ID

185–600 CFM compressor and less than 100 ft. hose length
1.5 in. ID
Over 600 CFM compressor or greater than 100 ft. hose length
2 in. ID
Sound Data**
Sound Pressure Level
133 dB(A)
Sound Power Level
139 dB(A)
Instantaneous Sound Pressure Level
131 dB(C)
** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614-2.


Complete Machine for 1-Year From Original Purchase Date (necessary PM items excluded) Call one of our Spray Equipment Specialists at 1-888-CJSpray for additional information.


Model # ecoquip-2-eqs2-elite-262981