MaxForce GH7225 Spray System w/ Monark 5:1 Transfer Pump
The GH7225AC uses a large gas driven Graco hydraulic pump that also operates the on-board air compressor for the 5:1 Monark feed pump.
Checking stock status...
Part Number
T10449-72
Loading price...
$0.00
Description / MaxForce GH7225 Spray System w/ Monark 5:1 Transfer Pump
Designed with the commercial contractor in mind spraying roof coatings from 55-gallon drums. The AC Series use large gas or electric driven hydraulic pumps that also operate an air compressor for the feed pump.
More Information
| Extended Desc | MaxForce AC Series Integrates Air Compressor for Operating 55-Gallon Drum Feed Pump Designed with the commercial contractor in mind spraying roof coatings from 55-gallon drums. The AC Series use large gas or electric driven hydraulic pumps that also operate an air compressor for the feed pump. These new compact packages are easy to move around a job site. Built in fly hooks, fork pockets and no flat tires give contractors many options in the field. Built in tie down brackets make it easy to secure during operation or installing into a truck or trailer. No Installation required Easily move around job sites No truck idle while spraying Transport to job site in truck or trailer Different pressure and flow rates available Enclosure paneling protects equipment Easy operation with intuitive control panel |
|---|---|
| Item Description | MaxForce GH7225AC Package: Based on the popular MaxForce GH4030AC, this sprayer is designed with the commercial roofing contractor in mind. If you are spraying silicone from 55-gallon drums, this unit is THE turn-key, integrated solution for you. Like the other sprayers in the AC series, the GH7225AC uses a large gas driven Graco hydraulic pump that also operates the on-board air compressor for the 5:1 Monark feed pump. With built-in fly hooks, fork pockets and no flat tires, this portable unit easily goes where you need it to be. GH7225 AC: 7,250 psi, 2.5 gpm Integrated 13.1 CFM Air Compressor for use with Monark 5:1 Feed Pump Dimensions: 31″ w x 51″ long x 56″ tall 18 HP Twin Cylinder Air-Cooled motor Ordering Information T10449-72 GH7225AC, Monark 5:1 Stick Pump, 260′ Hose (200 x 3/4, 50 x 1/2, 10 x 3/8), Graco Silver Plus HP gun, HD Swivel, 18″ High Pressure Gun Extension, 180° Swivel, XHD Tip and Guard |
| Requires Hazardous Shipping | No |
Price Match Guarantee
Find a lower price and we'll beat it!
Money Back Guarantee
30-day money back guarantee.
Free Tech Assistance
Questions? We're here to help.