MaxForce Turnkey Sprayers
MaxForce by CJ Spray
Gas Hydraulic Spray System
Realize the Flexibility of a Self-Contained Heated Sprayer
Waterproofing • Air Barrier • Roofing
Tube-in-shell heat exchangers have been the ideal choice for the waterproofing industry as they are unrestrictive and have high temperature increase capabilities. Their operation requires hot antifreeze that has traditionally been provided by the contractor’s vehicle engine. This requires a permanent and time consuming installation of equipment into a BoxTruck or Cube Van. It also requires a vehicles engine to idle while spraying and limits access to hard to reach areas. The MaxForce brings the flexibility of a self-contained heated system that uses its own antifreeze from its liquid cooled engine.
The Original MaxForce
Realize the Flexibility of a Self-Contained Heated Sprayer
Designed for material requiring heat that are stored in Poly totes or heated tanks where you can gravity feed the material out of the container and into the pump.
Who's it for: The residential waterproofing contractor
MaxForce AC
Air Compressor for Operating 55-Gallon Drum Feed Pump
Designed for nonheated material stored in drums where you need a extra pump to aid in proper loading of the material because it is to thick to properly load from just the standard pump.
Who's it for: The commercial air/vapor barrier and commercial roofing markets
MaxForce ACH
Heat the material utilizing the coolant from the engine.
Similar to the AC sytem, but designed for material requiring heat that is stored in drums.
Who's it for: The residential waterproofing and commercial air/vapor barrier contractor and roofing contractor where heating the product is required
MaxForce Benefits
- No Installation required
-
Easily move around job sites
-
No truck idle while spraying
-
Transport to job site in truck or trailer
- Different pressure and flow rates available
-
Enclosure paneling protects equipment
-
Easy operation with intuitive control panel
-
Calcium Chloride (CoSpray) kit optional
