SYSTEM,A-XP1,P2 GUN
The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates – resulting in better quality coating.
Loading Price
Part Number
P2Y165
Maintains temperature setpoints for better yield Maintains consistent output pressure for uniform spray pattern Easy to operate and maintain Best choice for affordability and durability
Three Heat Zones
- Three independent heat zones – ISO, resin and hose heat
- Provide accurate heat control for reliable spraying to handle different chemical viscosities
- Digital temperature controls
Three Heat Zones
- Three independent heat zones – ISO, resin and hose heat
- Provide accurate heat control for reliable spraying to handle different chemical viscosities
- Digital temperature controls
Recirculation Manifold
- A quick, easy way to balance system pressures
NXT Air Motor
- Low air consumption for increased efficiency
- Muffler provides low operating noise levels
- Air valve provides smooth and rapid changeover
ISO Pump Lube System
- Prevents isocyanate crystallization on the pump seal and shaft
Hybrid Heater
- Provides better temperature control
Quick Knockdown Pumps
- Allows for easy service
- Fast disassembly
Maximum Flow Rate (GPM) | 1.5 |
---|---|
Maximum Flow Rate (lb/min) | 25 |
Maximum Fluid Viscosity (cP) | 1500 |
Maximum Mix Ratio | 1:1 |
Minimum Fluid Viscosity (cP) | 250 |
Maximum Air Inlet Pressure (psi) | 125 |
Maximum Air Consumption (SCFM) | 32 scfm at 2000 psi |
Flush Type | Solvent |
Frequency (Hz) | 50/60 |
Gun Type | Probler P2 |
Hose Length (ft) | 50;10 |
Material Application | Polyurea |
Remote Mix Manifold Included | No |
Sound Power Level (dB(A)) | 80.1 |
Sound Pressure Level (dB(A)) | 70.2 |
Type | Proportioning Package |
Weight (lb) | 310 |
Wetted Material | Stainless Steel, Carbon Steel, Aluminum, Chrome, PTFE, Fluoroelastomer, Nylon |
Pump Filter Included | No |
Primary Fluid Heater Included | No |
Pressure Type | High Pressure |
Overall Depth (in) | 30 |
Overall Height (in) | 43.5 |
Overall Width (in) | 29 |
Phase | 1, 3 |
Power Rating (HP) | 17.43 |
Power Rating (kW) | 13 |
Power Rating (W) | 13000 |
Power Source | Air |
Includes | Proportioner;Probler P2 Gun;Heated Hose;Wheels;DataTrak |
Length | 0 |
Long Description | Reactor A-XP1 Proportioner Package, Probler P2 Gun, Wheels, DataTrak, 230/400 V |
Application Text | For polyurea coatings – applies up to 1.5 gal (5.7 L) per minute. |
Applicator Type | Manual |
Compatible Material | Plural Components |
Component A Inlet Size (in) | 3/4 |
Component A Thread Gender | Female |
Component A Thread Type | NPT |
Component B Inlet Size (in) | 3/4 |
Component B Thread Gender | Female |
Component B Thread Type | NPT |
Component Type | Two Component |
Application | Protective Coatings |
Amperage (A) | 26 @ 380 V ac (3-Phase WYE);45 @ 230 V ac (3-Phase Delta);56 @ 230 V ac (1-Phase) |
Width | 0 |
Air Inlet Size (in) | 1/2 |
Air Inlet Thread Gender | Female |
Air Inlet Thread Type | NPT |