SYSTEM, E-8P, 240V, FUSION CS
Description / SYSTEM,E-8P, 240V, FUSION CS
Lightweight and Portable
- Built in handles for easy carrying
- Weighs just 95 pounds (43 kg)
- Easy to maneuver
- Simple siphon feeding from 5 gal (19 L) buckets
Efficient and Fast
- Simple user controls
- Electric motor offers high performance while reducing operating costs
- Recommended maximum output of 0.25 gpm (.95 lpm)
Built for Maximum Usability
- Simple, single control knob operation
- Onboard hose wrap makes storing equipment simple and fast
- Plugs into standard electrical wall outlet
- Built-in suction lines allow for use with 5-gal (19 L) pails
Holster for Suction Lines
- Keeps tubes in place during transport; prevents drips.
Lightweight and Portable
- Easy to maneuver up and down stairs, wherever the job goes – only 95 lb (43 kg)
Alarm / Status Indicator
- Shuts down unit if off-ratio conditions exist – assures good quality foam at the job site
Desiccant Air Dryer
- Allows air to be drawn into pail; protects material from contamination.
Pressure Balance Valves
- Quick and easy balancing of system pressures enables correct start-up
Threaded Bucket Spout Connection
- Keeps your connection secure and prevents spills
Electric Motor
- Proven motor performance and reduced operating costs; plugs into a standard residential outlet
Easy Controls
- Intuitive start/stop with single knob operation
Spray Guns
- Uses standard Graco Fusion or P2 Guns; provides consistent spray patterns
- Easy to maneuver – 70% lighter than standard Reactor heated hose
Carrying Handle/Hose Wrap
- Easy to transport, convenient hose storage
More Information
| Maximum Flow Rate (lb/min) | 12 |
|---|---|
| Maximum Mix Ratio | 1:1 |
| Flush Type | Solvent |
| Frequency (Hz) | 50/60 |
| Gun Type | Fusion CS |
| Hose Length (ft) | 50 |
| Material Application | Polyurethane Foam |
| Remote Mix Manifold Included | No |
| Sound Pressure Level (dB(A)) | 94.4 |
| Type | Proportioning Package |
| Wetted Material | Stainless Steel, Carbide, Carbon Steel, Brass, Aluminum, UHMWPE, Chrome, PTFE |
| Pump Filter Included | No |
| Primary Fluid Heater Included | No |
| Pressure Type | Low Pressure |
| Overall Depth (in) | 15.06 |
| Overall Height (in) | 24.12 |
| Overall Width (in) | 34.58 |
| Power Source | Electric |
| Includes | Proportioner;Fusion CS Gun;Insulated Hose Bundle |
| Description | Reactor E-8P Proportioner Package, Fusion CS Gun, 240 V |
| Application Text | The Reactor E-8p is ideal for small to mid-sized no-heat joint fill applications |
| Applicator Type | Manual |
| Compatible Material | Plural Components |
| Component Type | Two Component |
| Application | Spray Foam |
| Air Outlet Thread Type | NPSM |
| Air Inlet Size (in) | 1/4 |
| Air Inlet Thread Type | Quick-Disconnect Pin |
| Air Outlet Size (in) | 1/4 |
| Requires Hazardous Shipping | No |
Price Match Guarantee
Find a lower price and we'll beat it!
Money Back Guarantee
30-day money back guarantee.
Free Tech Assistance
Questions? We're here to help.