Graco's Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to setup and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up.
Checking stock status...
Part Number P29572
  Loading price...

Description / SYSTM,E10,240V,2X20A,5X35FT,P2

Small size is ideal for on-site portability and hard-to-reach areas One-person operation saves time and money Use as an add-on to your existing spray business Versatile - switch from cold spray to hot spray to foam Saves 30% on material costs compared to disposable foam systems

Small ready-to-use systems with big results!

  • Intuitive start, stop and digital temperature display with single knob operation
  • Pressure balance valves give you quick and easy balancing of system pressures
  • Balanced proportioning eliminates pressure fluctuations for a consistent spray pattern
  • Easy-to-service fluid section reduces maintenance and increases productivity
  • Electric motor improves performance and reduces operating costs
  • Heaters and hose give you up to 2000 watts to pre-heat circulating material
Intuitive start, stop and digital temperature display with single knob operation Pressure balance valves give you quick and easy balancing of system pressures Balanced proportioning eliminates pressure fluctuations to give you a consistent spray pattern Easy-to-service fluid section reduces maintenance and increases productivity

More Information

Maximum Flow Rate (lb/min) 12
Maximum Mix Ratio 1:1
Maximum Working Pressure (psi) 2000
Flush Type Solvent
Frequency (Hz) 50/60
Gun Type Probler P2
Hose Length (ft) 35
Material Application Polyurethane Foam
Remote Mix Manifold Included No
Sound Pressure Level (dB(A)) 84.5
Tank Capacity (gal) 7
Type Proportioning Package
Weight (lb) 160
Wetted Material Stainless Steel, Carbide, Carbon Steel, Brass, Aluminum, UHMWPE, Chrome, PTFE
Pump Filter Included No
Primary Fluid Heater Included No
Pressure Type Low Pressure
Overall Depth (in) 30
Overall Height (in) 44
Overall Width (in) 26.5
Phase 1
Power Rating (HP) 5.10
Power Rating (kW) 3.8
Power Rating (W) 3800
Power Source Electric
Includes Proportioner;Probler P2 Gun;Heated Hose
Description Reactor E-10 Proportioner Package, Probler P2 Gun, 240 V, 1PH
Application Text For smaller polyurethane foam or polyurea projects or touch-ups - applies up to 12 lb (5.4 kg) per minute.
Applicator Type Manual
Compatible Material Plural Components
Component Type Two Component
Application Spray Foam
Amperage (A) 20
Air Outlet Thread Type NPSM
Air Inlet Size (in) 1/4
Air Inlet Thread Type Quick-Disconnect Pin
Air Outlet Size (in) 1/4
Requires Hazardous Shipping No

Price Match Guarantee

Find a lower price and we'll beat it!

Money Back Guarantee

30-day money back guarantee.

Free Tech Assistance

Questions? We're here to help.

Loading...